20*20mm HAKRC 35A F411 AIO 3-5S Flight Controller&ESC Compatibled with DJI Air Unit
A part of the review has been auto-translated.
Cheap!(^-^) It seems there are two types, up to 5S and up to 6S The first built aircraft was equipped with a 60A ESC even though it was 2205/2300kv It's no use leaving 60A as it is, so I've reconstructed it I changed this product to VTX (20x20) and it is simplified and lighter (^-^) The extra parts and the motor of this aircraft make one Instead, I bought a set of 5 for some reason only the CCW was spare, and I had 4 CCWs left I used it to build it (laughs) When the power supply and the motor were connected, the motor was broken and it was interrupted I have used about 2 different products in other vendors with similar products Racerstar's F4 type has two and both are OSD blacked out and useless The other company works fine (^-^) But it's overwhelmingly cheaper in terms of price, and I think it's the best product when you want to build a quad at a low price So far... (laughs)
Haven't yet installed this. Overall, the exterior looks very nicely put together with pads nicely laid out, shinny and completely untarnished. But beware the length of the board is quite long, so you may need to remove some standoffs or make other modifications to your 3 or 4 incher frame. Another point to note is that you will need to use rubber grommets to reduce the mounting hole size down to M2. Was it a good buy? Yes, for me, because Banggood's price for this was much better than from other online retailers. Thanks Banggood!
Let me try it. It's a long way. Nothing bad.
received quickly, not tested
супер
One of the best valued AIO for sub 4 inch builds
This fc works very well, 2 uarts and a softserial.
Great product, no complaints. I can recommend it.
good as it gets for that price.
Build quality seem very good