Ship to United Kingdom , USD
Top Positive Review for %s on Banggood, Shop best %s with lowest price on Banggood. Browse most helpful positive review for %s before you buy., rc toys, fun sports, fashion, popular electronics
Dola 12/12/2020
Well-made product. It works nicely. I recommend! Of course you need an external 12V DC power supply for the receiver but the remote controllers have batteries. Transmitters: 12*32*57mm; 17g (21g with holder) Receiver: 29*54*75mm; 67g; Electronics: 47*67*17mm; holes: o3,2mm 42*62mm. Three operating modes, can be set with a jumper: 1. Self-lock (T) - jumper is on pins 1-2 (inside): When a button is pressed for the first time, the relevant relay (A/B/C/D) turns ON, when same button is pressed again, relay switches OFF. The 4 relays can be used independently. Only one button can be operated at the same time, pressed one after the other, works nicely. 2. Jog (M) - jumper is removed: As long as the button is pressed, the relay is ON, when the button is released the relay switches OFF. The 4 buttons can be used independently and simultaneously. 3. Inter-lock (L) - jumper is on pins 2-3 (at edge): When the first button is pressed, the given relay turns ON, when another button is pressed, this relay switches OFF and the other turns ON. After the first press, one relay is always ON. When you press several buttons at the same time, the first one is ON all the time, the others are ON only until you press the button. Operating voltage: DC 12V (from 10V to 15V) Operating and idle current: 8mA when all relays are off (at 10…15V). Operating current at 10V with 1 relay ON: 43mA; 2 ON: 76mA; 3 ON: 110mA; 4 ON: 140mA Operating current at 12V with 1 relay ON: 51mA; 2 ON: 95mA; 3 ON: 135mA; 4 ON: 177mA Operating current at 15V with 1 relay ON: 63mA; 2 ON: 116mA; 3 ON: 166mA; 4 ON: 220mA Pairing the receiver and the transmitter: Power on the receiver. Press then release the “Learning button”, LED turns off. Press then release any button of the transmitter. The LED flashes three times. Done. Repeat it with all transmitter. Delete all pairing: Power on the receiver. Press and hold the “Learning button” for 8 seconds. Done. Perfect for DIY projects! :)
2
Comments (1)
Submit
  • Dola Continued:
    1. Self-lock (T) - jumper is on pins 1-2 (inside): When a button is pressed for the first time, the relevant relay (A/B/C/D) turns ON, when same button is pressed again, relay switches OFF. The 4 relays can be used independently. Only one button can be operated at the same time, pressed one after the other, works nicely.
    2. Jog (M) - jumper is removed: As long as the button is pressed, the relay is ON, when the button is released the relay switches OFF. The 4 buttons can be used independently and simultaneously.
    3. Inter-lock (L) - jumper is on pins 2-3 (at edge): When the first button is pressed, the given relay turns ON, when another button is pressed, this relay switches OFF and the other turns ON. After the first press, one relay is always ON. When you press several buttons at the same time, the first one is ON all the time, the others are ON only until you press the button.
    Operating voltage: DC 12V (from 10V to 15V)
    Operating and idle current: 8mA when all relays are off (at 10

    Reply 21/12/2020
Satisfaction Survey

Download APP to get an exclusive 10% off coupon