Customer Reviews

4.89 out of 5
See all 406 reviews
Write a Review
  • All Reviews (406)
  • Image (31)
  • Video (0)
  • All Star
    • All Star(406)
    • 5 Star(377)
    • 4 Star(20)
    • 3 Star(5)
    • 2 Star(2)
    • 1 Star(2)
Sort by:
Top Review
  • Top Review
  • Most Helpful
  • Most Recent
Reviews only from your country (Viet Nam)
Show Original

A part of the review has been auto-translated.

  • 29/10/2021

    Package arrived in very good condition. The clamp is well protected in the foam and carton box. The solid piece of aluminium gives a good first impression. The lever which is acting as a cam for different pressure levels has a bit of friction with the pressure area. I put some PTFE and is ok. The cam is running perfectly parallel to the pressure plate which means pressure is well distributed. One of the 2 bolts is a bit proud of the pressure plate and it will mar the workpiece if in contact. It needs filing. This means taking the other 4 bolts off connecting the steel spring to the main body. The cross hatched pillar is sligtly bigger than 20mm (just shy of 20.1mm) as can be seen in the vernier reading. I guess it will need a bit of light sanding down.

    Show Original
  • 09/01/2022

    I have purchased two of these clamps and received them before the estimated delivery date. The packaging is substantial and the clamps arrived undamaged. The clamps are well made and work as expected. They are a new twist on an old idea, the Holdfast which woodworkers have been using for a very long time, see photo. When using the clamp, to get full clamping pressure the clamp must be pushed down hard on the work piece with the cam lever in the reset position. If this is not done the cam has to take up any gap before exerting pressure on the work piece. When the cam exerts pressure on the work piece it causes the knurled shaft in the dog hole to press against the sides of the dog hole. This pressure is only at the top and bottom of the dog hole as the cam tries to rotate the clamp within the dog hole. The knurled shaft does not need to be knurled all the way round as it only bears on the dog hole where it is in line with the clamp arm. If the knurling was only where needed it would make fitting the clamp in the dog hole easier. If the clamp will damage the dog holes over extended use, only time will tell.

    Show Original
  • 04/12/2021

    Very handy and sturdy clip, great for use on countertops with holes for fixing. Made with excellent quality and fully metal. It arrived very well packaged, as can be seen in the attached photo. Secure the parts with good pressure, ensuring that they are immobilized during work. Just take care of the diameter of the clamping cylinder as they are two different sizes, 19 and 20mm.

    Show Original
  • 02/12/2021

    This clamps are very well made and nice to handle. Proud owner of this quality product. Thanks Dennis from Hooked On Wood for his recommendation.

    Show Original
  • 22/11/2021

    Well finished product. Robust and soft to use. Hold it tight. Very well conditioned.

    Show Original
  • 21/12/2021

    An excellent quality tool. Delivery time very good. I bought two units and I don't advise just one unit. Comes with a quality packaging. I am satisfied and strongly advise. I received through GLS to whom I thank her for the efficiency and professionalism.

    Comments (1)
    Show Original
  • 21/11/2021

    Excellent dog clamps. Had a strong clamping power, easy to use and apply. Excellent quality.

    Show Original
  • 08/11/2021

    Saw this in one of the Hooked on Wood reviews; so following the recommendation there decided to try it out. Was well packaged and seems to be very well built. No complaints with the holding power or design. Might end up having to get a couple more at some point. Fast shipping.

    Show Original
  • 14/10/2021

    Great wee clamps well made and easy to use in 20mm bench holes came well presented in foam lined cardboard box, which would allow me to have them stored protected in a workbench drawer

    Show Original
  • 20/01/2022

    This product arrived safely and was well packaged. The product is high-quality and works exceptionally well on my MFT Table! I highly recommend this product, and if purchased, it will not let you down! I will definitely order some more to have on hand for when needed.

    Show Original

    Total 0 pages

    Go to page


    You might be interested in

    recommendation for you
    • US$29.99
    • US$37.99
    • US$4.99
    • US$19.99
    • US$26.99
    • US$21.99
    • US$4.73
    • US$115.99
    • US$16.99
    • US$299.99