Customer Reviews

4.92 out of 5
Write a Review
  • All Reviews (37)
  • Image (4)
  • Video (0)
  • All Star
    • All Star(37)
    • 5 Star(34)
    • 4 Star(3)
    • 3 Star(0)
    • 2 Star(0)
    • 1 Star(0)
Sort by:
Top Review
  • Top Review
  • Most Helpful
  • Most Recent
Reviews only from your country (Indonesia)
  • 09/01/2018

    I’ used already in projects and works very good. Compact in size and very light weight gives plenty of power for drive almost anything. It remains cool even with big loads (I’ tested with 180W Load) and it’s very stable. Only the core of inductor it’s a little warm but for the amount of amperage that I drown in the circuit I think that is logic! The delivery time it’s not the fastest but good and the service of the seller it’s excellent.

  • 31/05/2019

    buck power supply unit. very well made, they have some minor traces of fluxant on the solder side, but that is not an real issue. good value for money, satisfied alimentatore buck. molto ben fatto, hanno alcune tracce minori di flussante sul lato saldato, ma questo non è un problema reale. buon rapporto qualità-prezzo, soddisfatto

  • 23/08/2018

    bought two piece for split power supply diy. smaller than expected. hope both works. need to change the trim pots with a liner volume control for more convenient usage.

  • 12/04/2019

    Very good for specialists in electronics .. I recommend it

  • 13/01/2021

    It's fine

  • 15/11/2020

    Does the job 100%. Very happy.

  • 01/12/2017

    These are the ticket for a greater capacity (amps wise) buck converter. Use it with a fused output and they will last a lot longer (If you are experimenting like I do). I also replace the board mount 10k pot with a remote mounted one. Makes it easier to adjust. I have 3 power supplies using this method and they work as well as the high priced ones. Nicely made little board.

  • 24/10/2019

    Очень долгая доставка - 72 дня. Модуль очень интересный, буду делать на его основе регулируемый блок питания.

  • 15/03/2018

    Ottimo rapporto qualità prezzo. L'ho provato con 12V e 5A e scalda un po' ma non eccessivamente. Con 8A penso sia necessario un buon raffreddamento. C'è bisogno di un multimetro per regolare gli ampere e i volt massimi in uscita. E' un buon prodotto.

  • 29/05/2020

    Printed circuit board of very good quality, capacitor 105°, received in an antistatic pouch, remains more than to be put into service.


    Total 0 pages

    Go to page

    recommendation for you
    • Rp98,853.99
    • Rp222,999.56
    • Rp133,395.07
    • Rp96,830.66
    • Rp249,591.86
    • Rp231,237.39
    • Rp94,807.33
    • Rp249,591.86
    • Rp279,074.63
    • Rp144,378.85
    • Rp93,795.67
    • Rp105,357.54
    • Rp72,550.73
    • Rp96,975.18
    • Rp83,100.94
    • Rp63,590.28
    • Rp128,047.71
    • Rp225,600.98