Equipment used: SkyRC B6 Mini (genuine) Batteries: Eachine QX95 QX90 E30 E30W Syma X5-15 X5C X5SW-1 H5C 1 To 4 3.7V 600MAH Upgrade Battery Procedure: After receiving a new set of four batteries, I charged each of them to 4.2v using the B6. All batteries came with around 3.8v of charge which is normal for long term storage. Once fully charged, I numbered each battery, #1 through #4, and ran them through a discharge and charge cycle on the B6. All four batteries were discharged, then all batteries were recharged in the same order to allow the battery rest between tests. All batteries appear identical. No markings under the outer blue labels to indicate their capacities. Settings: Discharge rate of 1.2A with cutoff of 3.2v Charge rate 0.5A with cutoff of 4.2v From full charge: Discharge / Charge (in mAh) Battery 1: 620 / 663 Battery 2: 296 / 312 <- Bad Battery 3: 612 / 643 Battery 4: 622 / 656 So, since only 3 out of 4 batteries are usable, it makes a great deal into just an okay deal. Below are the screenshots from the charge cycles. Hope this helps.

Equipment used: SkyRC B6 Mini (genuine) Batteries: Eachine QX95 QX90 E30 E30W Syma X5-15 X5C X5SW-1 H5C 1 To 4 3.7V 600MAH Upgrade Battery Procedure: After receiving a new set of four batteries, I charged each of them to 4.2v using the B6. All batteries came with around 3.8v of charge which is normal for long term storage. Once fully charged, I numbered each battery, #1 through #4, and ran them through a discharge and charge cycle on the B6. All four batteries were discharged, then all batteries were recharged in the same order to allow the battery rest between tests. All batteries appear identical. No markings under the outer blue labels to indicate their capacities. Settings: Discharge rate of 1.2A with cutoff of 3.2v Charge rate 0.5A with cutoff of 4.2v From full charge: Discharge / Charge (in mAh) Battery 1: 620 / 663 Battery 2: 296 / 312 <- Bad Battery 3: 612 / 643 Battery 4: 622 / 656 So, since only 3 out of 4 batteries are usable, it makes a great deal into just an okay deal. Below are the screenshots from the charge cycles. Hope this helps.

Equipment used: SkyRC B6 Mini (genuine) Batteries: Eachine QX95 QX90 E30 E30W Syma X5-15 X5C X5SW-1 H5C 1 To 4 3.7V 600MAH Upgrade Battery Procedure: After receiving a new set of four batteries, I charged each of them to 4.2v using the B6. All batteries came with around 3.8v of charge which is normal for long term storage. Once fully charged, I numbered each battery, #1 through #4, and ran them through a discharge and charge cycle on the B6. All four batteries were discharged, then all batteries were recharged in the same order to allow the battery rest between tests. All batteries appear identical. No markings under the outer blue labels to indicate their capacities. Settings: Discharge rate of 1.2A with cutoff of 3.2v Charge rate 0.5A with cutoff of 4.2v From full charge: Discharge / Charge (in mAh) Battery 1: 620 / 663 Battery 2: 296 / 312 <- Bad Battery 3: 612 / 643 Battery 4: 622 / 656 So, since only 3 out of 4 batteries are usable, it makes a great deal into just an okay deal. Below are the screenshots from the charge cycles. Hope this helps.

Funciona muy bien y lo que te ahorra de tiempo, no tienes que cargarlas una a una y estar pendiente de ello. También dispone de indicadores led que te indican que baterías están cargando y las que ya están cargadas.

Funciona muy bien y lo que te ahorra de tiempo, no tienes que cargarlas una a una y estar pendiente de ello. También dispone de indicadores led que te indican que baterías están cargando y las que ya están cargadas.

Funciona muy bien y lo que te ahorra de tiempo, no tienes que cargarlas una a una y estar pendiente de ello. También dispone de indicadores led que te indican que baterías están cargando y las que ya están cargadas.