2019-08-30 04:37:11

Good little Camera. If you want to use it seperately you can 3D print housings from thingiverse. You need to make a 1S Adapter for the eachine batteries depending on which ones you use. You can also trim off the excess cables to make it more compact. In that case you need to solder the top two connectors together to have a video signal like shown in the attached pictures below. Cheers and have fun. Stefan from Germany

2020-01-08 14:40:10

Good camera, small and light. Be careful of the power connector, mine was reversed, can be seen in images.

2019-05-06 11:34:30

Very super mini camera!

2019-05-04 02:38:19

Nice AIO. Channels and Band can be set via push button or SmartAudio. If you change via Betaflight each change needs a reboot to take effect.

2019-04-18 00:32:56

Great camera for the price! It has Vin and Vout to set up with an FC that does OSD (like most all do now) and it also has Smart Audio! FYI if the Vin goes to the Vout of your FC and vica versa (at least on betaFPV's boards). The FOV is a bit smaller than the cam that comes on the Mobula7 or the UR65 but it has nice colors and works well. I don't mind the centered antenna but you may need to mod you mount or canopy. I always bend my antenna back at a 45 deg angle or so.

2019-04-07 16:15:52

Cheapest cam with smart audio. Fits mobula with tilting the antenna to one side. Image quality seems to be the same with the original mobula camera, if not better. Antenna is directly soldered and connection looks strong. I soldered 4 wires and left black one loose.

2019-12-05 07:46:39

Muito bom, chegou antes do previsto

2019-08-10 15:25:15

Todo correcto una ya esta montada y funciona bien y la otra es para futuros proyectos!! Recomendable y a muy buen precio!!