Customer Reviews

4.7 out of 5
Write a Review
  • All Reviews (159)
  • Image (27)
  • Video (1)
  • All Star
    • All Star(159)
    • 5 Star(130)
    • 4 Star(17)
    • 3 Star(7)
    • 2 Star(3)
    • 1 Star(2)
Sort by:
Top Review
  • Top Review
  • Most Helpful
  • Most Recent
  • December-01 2019 10:43:12

    Not for the faint hearted to assemble :) Yet, not very very hard. Just have some experience and patience and it's a fun job!! Does not beep, just a small "burp". Measured with an oscilloscope and I see the +5v square pulse in the buzzer. Seems probably a passive buzzer is being sent instead of an active one. But, otherwise, it's awesome and accurate.

    Comments
  • September-02 2020 16:08:13

    J’ai enfin reçu le kit, je les commander il y a 6 mois mais était perdu par la poste, sinon le kit en lui même est assez simple à assembler juste un peut de minutie avec les composants en smd.

    Comments
  • January-03 2020 12:13:49

    Kaliteli duruyor, daha parçaları birleştirmedim, vergi ödemedim ve 2 hafta içinde geldi.

    Comments
  • October-31 2018 03:45:26

    BANGGOOD IS VERY GOOD SHOPPING SITE. I HAVE PURCHASE 5 TIMES IN THIS SITE. I HAVR RECEIVED PROPER MY PRODUCT. WITH FREE SHIPPING & PAID SHIPPING. IN THIS TIME I HAVE PURCHASE DITAL DOT MATRIX LED CLOCK. I HAVE ASSEMBLED SUCCESSFUL. MY CLOCK IS RUNNING SUCCESSFUL. I M VERY HAPPY FOR THIS PRODUCT. PLEASE SEE MY PRODUCT IMAGE & VEDIO. FURTHER BANGGOOD SITE IS VERY. I HAVE RECOMMEND FOR THIS SITE.

    Comments (1)
  • November-11 2019 07:05:08

    i have purchase ones against because the geekcreit diy ds3231 touch key precision high brightness is very good clock. before this purchase earlier i have 2 times purchase. first time i have failed to make the led clock. & second time i have success in one short.

    Comments (1)
  • March-08 2017 06:05:47

    It will be a good training for soldering surface mount parts. Because there are few parts, if you are used to it, it will be easy to complete in about an hour. It seems that it has a built-in calendar until 2099, and when you set the date it displays the exact day of the week. In the time setting, you can set up to seconds. The kit sent to me had a translucent acrylic shell. Can you choose transparent or semi-transparent one?

    Comments (3)
  • November-25 2017 08:23:00

    This was my first attempt with SMC soldering, and I managed this quite eaily. Major issue was to read the resistors' references, but with a magnifier or a close up picture, it was OK. I also had to track one dry join (one colomn of the display remained off), but looking at were this led block was coming from, I fixed it. Only minor problem remaining is the buzzer, but I don't need the alarm clock feature. A bit too bright even at lowest level, and 3°C accuracy for temp, which is a bit high. Anyway,

    Comments (1)
  • September-26 2017 23:22:54

    After installed all the components except the display, there is no alarm sound when testing. But I can hear some beep like I touching the touch button. I go ahead to installed the display, and I can see the clock is working but sometime the Time menu displayed. I know there is some problem with the switch. 4 hours try to figure out what is the issue, finally all working fine except the sound barely can hear it. Just re-solder everything solved the issue. Even really tough to solder the SMD components,

    Comments
  • August-19 2017 07:26:32

    Hello, I am from Amsterdam Netherlands. I have buy this clock and put it together. I must say I am not a expert on this. The soldering with a big solder was to complicated and I have used a mini solder for better result. After assemble the clock the display was not working good. A few matrix blocks are not working. The problem was the main big chip. I used to many solder on that chip. I removed so 70% of the solder with a copper Itze wick. A sort of streng of Cooper to absorb the solder from the chip. After

    Comments
  • March-23 2017 09:47:31

    The package came in a normal envelope with some protection. Bring some extra small pieces in case there is a problem. I am a beginner welder, and the assembly has been complicated by the size of the parts and the proximity of the welds. I've had to redo some. The result is a nice watch with customization options.

    Comments
Show:

    Go to page

    Go

    You might be interested in

    recommendation for you
    • Rp179,574.19
    • Rp121,869.29
    • Rp1,708,179.75
    • Rp50,097.04
    • Rp155,745.80
    • Rp176,129.12
    • Rp362,019.27
    • Rp178,712.92
    • Rp162,205.30
    • Rp967,346.50
    • Rp116,988.78
    • Rp237,422.63
    • Rp209,862.08
    • Rp59,140.34
    • Rp296,132.34
    • Rp286,945.49
    • Rp57,274.26
    • Rp1,004,668.07