Customer Reviews

4.92 out of 5
Write a Review
  • All Reviews (423)
  • Image (77)
  • Video (1)
  • All Star
    • All Star(423)
    • 5 Star(394)
    • 4 Star(25)
    • 3 Star(4)
    • 2 Star(0)
    • 1 Star(0)
Sort by:
Top Review
  • Top Review
  • Most Helpful
  • Most Recent
Reviews only from your country (Indonesia)
|
Show Original

A part of the review has been auto-translated.

  • 23/11/2020

    indeed in 8 working days very fast DHL bravo for the fast and safe transfer of the package .. thanks bangood !! The only thing I found And it looks in a photo, in the nozil next to it is so tight the part That is crooked..I do not know if it should be so I hope Yes Do not cause me any defect..Otherwise everything is fine .. I will return with comments the function of the prinder !!

    Comments (3)
    Show Original
  • 11/05/2021

    This is the best hobby investment I've made in a long time! This printer is amazing value for money, and while I bought mine on sale for $170, the normal price is still incredibly low for what it delivers. I've owned a Creality Ender 3 for years, and this has become my go-to for every filament, complex, sizable models, it's just better at everything. The one con I can point out about the Tarantula Pro is the complete lack of information out there for it - of course, FDM printers in general are a DIY nightmare, but this printer, in particular, is a dearth of info. So, things to keep in mind: 1 - The cooling fans on this printer do NOT mess around. I have no idea what I'll ever need 100% fan speed for. Print PLA with 40%, 50% if you have overhangs. Less if you need strength. If you leave the fans at 100%, the printer will go into thermal runaway at about 225C, as the hotend cannot keep pace. 2 - The hotend is a HUGE WIN, and can accurately slap down plastic at 80mm/s. It can stay hot no matter how fast I print. But again, zero information given, so "J-style, V6, Volcano, 21mm"are the terms you'll need to replace heads on it. 3 - Tighten your belts. When you think they're tight enough, tighten them again. 4 - Molybdenum grease for the Z screw. Apply it with your least favorite rag, shuttle your gantry up and down, then wipe it all off. 5 - The build surface is great. The adhesive on the bottom is garbage, and trapped air in mine are now bubbles on the build surface. PEI plate inbound. 6 - 0.1mm layers at 40mm/s, 40% fan results is fantastic quality prints. 0.15mm layers at 60mm/s almost cuts the time in half. 7 - 7mm retract, at 50mm/s. The Volcano is a big hot nozzle, and you need big hot, sweaty retraction. Oh my... 8 - The screws on the extruder will work themselves loose. The human that owns them will tighten them over time. 9 - It comes in the wrong box. Do not get excited, you did not get the RS. Please ask any questions here or at Ghost Ryder FPV on YouTube.

    Comments (3)
    Show Original
  • 05/03/2021

    Excellent printer, accurate design, quality / price ratio among the best. Personally I had problems with the temperature sensor of the hotend (faulty) and for an incorrect assembly of the hotend (gap between the nozzle and the throat bar, creating big printing problems). Not excellent but sufficient assistance, really basic assembly instructions (I recommend to see tutorials on Youtube) and some problems with screws too long or too short.

    Comments (2)
    Show Original
  • 28/09/2020

    I'm very satisfied with this printer, it has a good price, delivery was fast and print quality is very good, even I never printed anything before, did no special adjustments beforehand and I just took default values. The design is good, not many exposed parts and cables are neatly organized. However, I wouldn't recommend it for someone who's not willing or able to assemble it, as it came in a box full of parts, nuts, bolts, cables, and much other stuff. It took me several hours to assemble, following a very detailed video from SuperTechDan (look for it in Youtube), which I strongly recommend for the buyers, and it really requires to put hands-on and be careful not to damage any part. I think this is part of the fun and provides a clear understanding of all parts, but if you want something to print after 30 minutes, I suggest you look for another model instead.

    Comments (4)
    Show Original
  • 15/08/2020

    It came extremely quickly from the CZ warehouse, earlier than the stated 1 week. Probably the best 3d printer for this kind of money. I think is perfect for a beginner maker that doesn't want to spend a lot of money from the start. It comes as a kit though, that needs to be assembled. It doesn't have assembly instructions in the box, but I put it together following some instructions found on youtube. The parts pack is pretty good, having a 32bit mainboard, a volcano hot end clone, and a titan extruder. My bed came a bit warped on the Y axis, not by much, but with careful bed leveling there are no problems while printing. One drawback is that the spool holder needs to be printed, but the included filament is not sufficient to print it. So, until you manage to print it from the SD card you have to somehow improvise your own holder. Mine came branded as TEVO, not Homers, both on the box and on the bed. It printed fine "out of the box" without needing additional tweaks.

    Comments (2)
    Show Original
  • 27/09/2020

    So my experience and evaluation for this printer. At first I was sceptical, if this 3D printer is any good for this money at all. Well let's say it like this: Definitely clear purchase recommendation!!! Absolutely good printing result. The printer comes as a kit, where you should easily count on the setup times 2-3 hours, I set it up and aligned it myself via YouTube videos. the alignment is enormously important for the quality of the print. As soon as everything was set up and connected, I did the first printing. At first I thought omg what is he doing there, but when you see the results, great!!! There is a YouTuber who tests this printer and sets it up a little bit better. I have joined the same settings and have already been positively surprised by the result. I changed the filament feed and ordered a higher quality one on eBay, 5€. But look at my pictures. And the nice thing about Homers, you can also upgrade anything if you want to. I have to say that the 3D printer delivers really great performance in this price range. Clear recommendation from my side.

    Comments
    Show Original
  • 26/09/2020

    An excellent printer, after calibrations it printed better, the SD that came in package was damaged, I still need to calibrate it more, because I am a beginner, but I think it prints very well. It would be good to include the manual, becouse the official video has some errors in the placement of the screws.

    Comments
    Show Original
  • 27/12/2020

    It's a good device, but... The two cables from the display to the mainboard are too short! A screw of the Y-axis is too long, it has to be shortened otherwise the slide will not run. The customer service is not responding! I have already written three e-mails and one video but no reaction!

    Comments (4)
    Show Original
  • 02/10/2020

    I liked it, took time to arrive by the issue of the mail strike,but got to Brazil fast,just thought it has many different plastic parts from the old one that there were more metal parts,I think this will not compromise on the quality of print but on the durability that will drop a lot

    Comments
    Show Original
  • 22/01/2021

    Fantastic print quality on first run using Cura via USB. Fast printing, easy to follow videos on youtube for build. Heat bed per-heat is good on this brand faster.

    Comments
    Show Original
Show:

    Total 0 pages

    Go to page

    Go

    You might be interested in

    recommendation for you
    • Rp3,178,142.82
    • Rp2,854,443.09
    • Rp6,606,417.25
    • Rp294,272.48
    • Rp311,781.70
    • Rp2,928,011.21
    • Rp5,135,054.84
    • Rp3,236,850.18
    • Rp3,854,822.40
    • Rp382,407.09
    • Rp3,810,828.66
    • Rp587,367.88
    • Rp2,148,041.99
    • Rp150,961.78
    • Rp146,989.11
    • Rp1,912,624.01
    • Rp65,034.22
    • Rp2,795,441.46