JF-0826B 12V DC 10mm Hard Magnetic 20N Push Pull Electromagnet Frame Solenoid
JF-0826B 12V DC 10mm Hard Magnetic 20N Push Pull Electromagnet Frame Solenoid
ดี
Manque un peu de puissance.
A good, powerful solenoid. The core inside backlash. Heated at work, but not so much. The coil is spinning.
Very good product
Great item. Quick delivery.
good
No problem by function at 12 Volt current consumption is about 1.3 Amperes, and force is 600 grams at the beginning and about 1800 grams at the end. Polarity is not important, works well and the function time is about 0.1 seconds. 13mm is the total working distance, after 10 minutes of working duty cycle, the coil temp. is than about 45 degrees Celsius temperature ! good for robotics and short movement applications.
Received on time within the mentioned delivery duration. The item has good quality. Checked the operation with a 12V/2Amp adaptor, the solenoid gets activated and the strength is very good. If you keep the solenoid activated for a sustained duration (several seconds) the coil gets heated up, but I guess this is normal. Great quality at a great price.
Small, compact and mechanically good. It is rated as Current :2A Voltage: 12V DC Working voltage: 24V I ran it for a couple of minutes from a 12V battery and it became hot. I would not run it from a 24V source as shown as "working voltage". Is this an error in the data? My application only requires intermittent power so it should be OK. The mounting holes appear to be tapped for screws, this is not mentioned in the specification.
came quickly and as described. have this in mind for a project so cant wait to mount it and try it out. looks very good quality for the prices paid. Recommend.