Customer Reviews

4.93 out of 5
See all 14 reviews
Write a Review
  • All Reviews (14)
  • Image (2)
  • Video (0)
  • All Star
    • All Star(14)
    • 5 Star(13)
    • 4 Star(1)
    • 3 Star(0)
    • 2 Star(0)
    • 1 Star(0)
Sort by:
Top Review
  • Top Review
  • Most Helpful
  • Most Recent
Reviews only from your country (Viet Nam)
Show Original

A part of the review has been auto-translated.

  • 04/12/2019

    this is not a first airplane. it has no self stabilizing tendencies (no dihedral to auto level) so you have to fly it all the time. that being said it is a good second or 3rd airplane depending on your prior skill. I am running mine on a 1650kv motor and 30a esc and 1300mah 3s. I don’t see how you could fit anything bigger in. I started with a ep8060 prop and it was too much, it melted the hot glue holding the esc in. I stepped it down to an apc 7x6E which is better but still too much prop for my combo. I have apc 7x4E props on the way which I think will be just right. I couldn’t get the wood flap to stay glued onto the wing so I am using single #64 bands to hold the wing down. I added 2 1x6mm 500mm long carbon strips in the wing. the receiver is in the pocket for the center servo and I didn’t need any servo extensions. I am using 2.25 inch tires and I think it will handle grass ok. it has snowed for the winter so I am on skis now which it handles good. The springs on the skis have a tendency to nose it over but I need the angle. it has great aerobatic potential and I think it will be a favorite little park Flyer. it’s just the right size to keep around. mine was built with rudder from the start. it doesn’t need it in the air but makes ground handling fun. I added some holes for cooling air and a scoop out of lexan scraps it should help with temperatures along with the prop change.

    Show Original
  • 01/11/2019

    Der Karton war schlecht verschlossen, aber es fehlte nichts. Sehr weiches Material. Ich werde es mit GFK belegen. Die Kanten müssen entgratet werden etc.. Die Rumpf-Schalen haben zwei große Spalte und passen nur zu 95%. Alle Steuerung-Teile, auch für das Seitenruder sind vorhanden! Wenn ich damit fertig bin, wird das ein sehr schönes erstes Modell zum fliegen lernen für meinen Enkel. Ich finde es ist eine klare Kaufempfehlung für den Einstieg im fliegen als auch bauen.

    Show Original
  • 29/05/2019

    Please note that I have not built or flown this model yet, but I am impressed with the design and quality of the kit. Yes it is actual does appear to be EPP (and not just EPO), the foam completely bounces back after crushing it (were as EPO will leaves a dint). If you apply some reinforcing tape around the nose area, this should be a very tough model.

    Show Original
  • 07/08/2020

    This is a wonderfully versatile plane. Reduce the throws and it is a great trainer plane. Increase the throws and it is extremely aerobatic. Move the weight back and it flies a bit like a 3d plane. Sturdy except you will need to brace the landing gear. A great bargain all in all even if it does look a little old school.

    Show Original
  • 22/04/2020

    Two MG-800s became one MG_800(1000). I have installed the following components: 2 x Racerstar BR2212 2450KV 2-3S Brushless motor, 2 x HTIRC Hornet Series 30A 2-4S brushless controller with 5V/2A BEC, 6 x MG90S metal gearbox RC micro servo, receiver Futaba R2006Gs 2 x Floureon 11.1V LiPo 1800 mAh 25 C and as transmitter: Futaba FX 32. I have made the damping surface of the elevator from the remnants of the wing. The elevator itself is a new construction from Balsaholz and hopefully the part will fly as well.

    Show Original
  • 20/07/2020

    All good except some missing screws and nuts. Zip locker was thorn and lost most of the screws and nuts. Cannot fix the Ailerons and flaps without these missing items. Found few inside the carton box but still many missing. Appreciate of you can send them from your US warehouse quickly.

    Show Original
  • 20/09/2019

    This is taking forever to arrive

    Comments (1)
    Show Original
  • 17/04/2020

    Good product.

    Show Original
  • 21/01/2020

    Plane has arrived, in good undamaged condition. I do find the instructions about as useful as tits on a bull however.

    Show Original
  • 16/01/2020

    Very happy with this kit, it arrived with no damage and all parts present, i have a feeling this is going to be a great little fun flyer

    Show Original

    Total 0 pages

    Go to page


    You might be interested in

    recommendation for you
    • US$89.99
    • US$32.99
    • US$43.99
    • US$168.99
    • US$55.99
    • US$13.55
    • US$9.55
    • US$53.99
    • US$23.99
    • US$13.50
    • US$118.99
    • US$69.99
    • US$159.99
    • US$112.99
    • US$109.19
    • US$119.99
    • US$75.99
    • US$59.99