Compatibility
To confirm that this part fits your vehicle, please enter your vehicle's details below.
-
Year:
-
Make:
-
Model:
-
Submodel:
-
Trim:
-
Engine:
- Clear All
This part is compatible with 0 vehicle(s).
Show all compatible vehicles
This part is compatible with 1 vehicle(s) matching
This part is not compatible with
- Year
- Make
- Model
- Submodel
- Trim
- Engine
Type A:
Features:
With the housing, you can use it directly, the sensor resolution is 24*32 dot matrix.
Built-in rechargeable lithium battery, Micro USB interface, interface voltage does not exceed 5V.
The response frequency is 8Hz, the target temperature measurement range is -40~+300℃, and the use environment is 0~50℃.
The emissivity can be adjusted from 0.1 to 0.99 range.
Sensor probe field angle, default 35 degrees*55 degrees MLX90640BAB probe.
2.4 inch LCD screen resolution is 320*240, the screen shows the highest temperature, the lowest temperature, the center point temperature, displays each coordinate point.
The measurement accuracy is ±2℃.
Camera function: built-in memory, you can take 100 photos. Once the Micro USB cable is connected to the computer, you can view, copy, and delete the images on your computer.
Can be applied to human body temperature detection, PCB component heating temperature detection, floor heating temperature detection, automotive parts temperature detection, electrical switch temperature detection, air conditioning and microwave oven detection, etc.
Specification:
Material: ABS
Color: black
Display: 2.4 inch color display, 320*240
Resolution: 32*24
Field of view: 35° * 55°
Temperature measurement range: -40℃~300℃
Measurement accuracy: ±2℃
Refresh rate: 8Hz
No calibration required
Emissivity: 0.1~0.99 adjustable
Battery: 1 * lithium battery, 1000mAh (included)
Charge time: about 2 hours
Power: Micro USB 5V/1A
Working temperature: 0℃~50℃
Item size: 160 * 56 * 25mm / 6.3 * 2.2 * 1.0in
Item weight: 119g / 4.2ounce
Package size: 180 * 100 * 30mm / 7.1 * 3.9 * 1.2in
Package weight: 121g / 4.3ounce
Package Includes:
1 x Thermal Imager
Details Pictures:






Type B:
Features:
With the housing, you can use it directly, the sensor resolution is 24*32 dot matrix.
Built-in rechargeable lithium battery, Micro USB interface, interface voltage does not exceed 5V.
The response frequency is 8Hz, the target temperature measurement range is -40~+300℃, and the use environment is 10~50℃.
The emissivity can be adjusted from 0.1 to 0.99 range.
Sensor probe field angle, default 35 degrees*55 degrees MLX90640ESF-BAB probe.
2.4 inch LCD screen resolution is 320*240, the screen shows the highest temperature, the lowest temperature, the center point temperature, displays each coordinate point.
The measurement accuracy is ±2℃.
Two color modes can be selected: iron red and rainbow.
With photo taking function, built-in memory, you can take 100 photos, without using other tools, use Micro USB cable to connect directly to the computer, you can browse, copy, delete pictures.
Can be applied to human body temperature detection, PCB component heating temperature detection, floor heating temperature detection, automotive parts temperature detection, electrical switch temperature detection, air conditioning and microwave oven detection, etc.
Specification:
Material: ABS
Color: blue+red
Resolution: 32*24
Temperature measurement range: ‐40℃~300℃
Measurement accuracy: ±2℃ (center area, 0~100℃)
Working temperature: 10℃~50℃
Working humidity: ≤70%
Refresh rate: 8Hz
No calibration required
Sensor field angle: 55°x 35°
Emissivity: 0.1~0.99 adjustable
Display center point, highest and lowest temperature
Color modes: iron red, rainbow
Battery: 1 * lithium battery, 750mAh (included)
Use time: 4h
Charging time: 1.5h
Screen size: 2.4inch
Display resolution: 320 x 240
Power jack: Micro USB 5V/1A
Item size: 87 * 53 * 20mm / 3.4 * 2.1 * 0.8in
Item weight: 58g / 2.0ounce
Package size: 135 * 70 * 30mm / 5.3 * 2.8 * 1.2in
Package weight: 105g / 3.7ounce
Note: it is recommended to fully charge the thermal imager before connecting it to the computer, and then connect to the computer after shutting down.
Package Includes:
1 * Thermal Imager
1 * USB Cable
1 * Lanyard
(Description and pictures updated on 2019/12/23)
Details Pictures: