Customer Reviews

5 out of 5
Write a Review
  • All Reviews (17)
  • Image (2)
  • Video (0)
  • All Star
    • All Star(17)
    • 5 Star(17)
    • 4 Star(0)
    • 3 Star(0)
    • 2 Star(0)
    • 1 Star(0)
Sort by:
Top Review
  • Top Review
  • Most Helpful
  • Most Recent
Reviews only from your country (Indonesia)
|
Show Original

A part of the review has been auto-translated.

  • 28/07/2020

    Just received the SK35. I have not had much time on it but it seems to work well. I used it as a battery eliminator for a single cell LiPo powered mini PC(Gole1). The Gole1 current draw was typically well under 1.6 amps(~.56A@idle). I connected the SK35 output to the Gole1's battery input connector. The SK35 ran fairly cool under that load. Supplied the SK35 with a 19.5V laptop power supply, set volts out to 4.7, set outgoing current limit to 3 amps. Ran it in CV for this application. The SK35 retains the setting, even when the laptop power supply is removed. Overall pretty nice gadget. Ultimately, I will place the SK35 in to an enclosure with banana plugs, should be a pretty nice little bench supply. Delivery was a little long(90 days) due to the Covid factor. If you want it faster , you may want to choose a faster shipping option. Thanks Banggood.

    Comments
    Show Original
  • 25/09/2020

    Using the XY-SK35 as replacement for wall-warts for single board computers in combination with old laptop adapters. Made a console-enclosure with a 3D-printer to make it more accessible and user-friendly.

    Comments
    Show Original
  • 10/09/2020

    Nice universal charging module. With higher currents it may get pretty hot. I was curious what is under heat sink and found out there is no thermal paste so I applied some. It doesn't lower the temperatures significantly but it will improve thermal dissipation from semiconductors to heat sink.

    Comments
    Show Original
  • 08/06/2021

    All good

    Comments
    Show Original
  • 14/02/2021

    top

    Comments
    Show Original
  • 09/11/2020

    Very good and the finish is great.

    Comments
    Show Original
  • 25/06/2020

    Good reception. I'm satisfied.

    Comments
    Show Original
  • 28/02/2020

    It is... way more accurate than I thought it would be... but it does get hot. it might be a good idea to fit some more, small, heatsinks onto some of the smaller components, and also, do not forget to add some thermal paste under the existing heat sink, as it comes bone dry. this is a really useful little thing.

    Comments
    Show Original
  • 06/01/2020

    Very good

    Comments
    Show Original
  • 10/12/2019

    最高です!

    Comments
    Show Original
Show:

    Total 0 pages

    Go to page

    Go

    You might be interested in

    recommendation for you
    • Rp79,914.05
    • Rp249,804.31
    • Rp101,934.16
    • Rp155,744.90
    • Rp158,369.81
    • Rp65,477.02
    • Rp82,976.45
    • Rp572,231.25
    • Rp96,392.67
    • Rp64,310.39
    • Rp182,285.69
    • Rp159,244.78
    • Rp122,933.47
    • Rp107,329.82
    • Rp626,916.95
    • Rp131,099.87
    • Rp116,517.01
    • Rp65,331.19