Thin, light and portable mechanical switch keyboard. I didn't know if I could choose a color or a switch with only one left in stock when ordering, but as a result I got an appearance gray key cap & blue axis. Although I usually avoid the blue axis because I prefer quietness, the quality of the keystroke is different compared to the red axis and the yellow axis, and the volume is not much different. It feels good to have a click feeling. Space, BackSpace, Enter and Left Shift sound with stabilizer are very annoying. Like other mechanical machines, it seems to be possible to improve it if you lubricate and grease it properly. The bluetooth can be switched between three 2.4G receivers, wired. Switch one of the FN+QWERTs with one touch, and press and hold to pair. Shortcuts are clearly displayed on the keycap. I've tried pairing it with iPad mini, macOS, Windows, and Android, but the connection switch is very fast. Japanese input is also comfortable. The battery is not checked. The keycap is comfortable to touch and gives a slightly cold impression. Hand grease and fingerprints may be easy. Personally, I don't need the LED light, so I want to turn it off. The LED brightness can be changed up and down the FN+ cursor keys, and I do not like the flashing light that turns off when it is darkest, but the color and the flashing pattern can be changed variously. It may be a little cool if you lower the brightness with a yellow LED. The shaft base of the lower left CTRL keycap appeared to be cracked, and it was easy to disengage. Whether it was cracked at the time of resin molding or when it was handled, it was troublesome to return it as an initial defect in any case, so it was reinforced by combining adhesive and paper. Even if reinforced, it is invisible because it is on the back side and does not affect the LED transmission of the key cap. It's thin and cool, but it's easy to hook the corner key cap when carrying it, and it's likely to break it if you don't think about putting it in a specific pocket of a case or bag.

薄くて軽くて持ち運び可能なメカニカルスイッチキーボード。 注文時に残り在庫1つで、色が選べるのかどうか、スイッチが選べるのかどうか分からなかったが、結果としては外観グレーキーキャップ＆青軸が届いた。 静音を好むため青軸は普段から避けていたが、赤軸や黄軸に比べると打鍵音の質が異なり、音量はさほど変わらない。クリック感があって気持ち良い。 スタビライザーのあるSpace、BackSpace、Enter、左Shiftの音はカシャカシャとかなり煩い。他のメカニカルと同じく適当に注油・グリスアップすれば改善できそう。 bluetoothが3つ、2.4Gレシーバー、有線、を切り替えられるようになっている。 FN＋QWERTのいずれかをワンタッチで切り替え、長押しでペアリングする。 ショートカットはキーキャップに分かり易く表示されている。 iPad mini、macOS、Windows、Androidとペアリングしてみたが、接続の切り替えは非常に速い。日本語入力も快適。 バッテリーの持ち具合は未確認。 キーキャップは触り心地がよく少し冷たい印象を受ける。手脂・指紋がつき易いかもしれない。 個人的にはLEDライトは不要なのでOFFにしたい。 FN＋カーソルキー上下でLED輝度が変えられるようになっており、一番暗くすればライトOFFになるチカチカ点滅するのは好きじゃないが、色も点滅パターンも色々と変えられるようになっている。 黄色LEDで輝度低めにするとちょっと格好良いかもしれない・・・。 左下CTRLのキーキャップの軸付け根に亀裂が入っているようで、外れ易かった。 樹脂成形時の亀裂か、取り扱い時にぶつけたか・・・、いずれにせよ初期不良として返すには面倒なので接着剤と紙を組み合わせて補強した。補強しても裏側なので見えないしキーキャップのLED透過にも影響ない。 薄くてなかなか格好が良いが、持ち歩く際は角のキーキャップを引っ掛け易く、ケースやカバンの特定のポケットに入れるか等、工夫しないとすぐ壊しそう。

Thin, light and portable mechanical switch keyboard. I didn't know if I could choose a color or a switch with only one left in stock when ordering, but as a result I got an appearance gray key cap & blue axis. Although I usually avoid the blue axis because I prefer quietness, the quality of the keystroke is different compared to the red axis and the yellow axis, and the volume is not much different. It feels good to have a click feeling. Space, BackSpace, Enter and Left Shift sound with stabilizer are very annoying. Like other mechanical machines, it seems to be possible to improve it if you lubricate and grease it properly. The bluetooth can be switched between three 2.4G receivers, wired. Switch one of the FN+QWERTs with one touch, and press and hold to pair. Shortcuts are clearly displayed on the keycap. I've tried pairing it with iPad mini, macOS, Windows, and Android, but the connection switch is very fast. Japanese input is also comfortable. The battery is not checked. The keycap is comfortable to touch and gives a slightly cold impression. Hand grease and fingerprints may be easy. Personally, I don't need the LED light, so I want to turn it off. The LED brightness can be changed up and down the FN+ cursor keys, and I do not like the flashing light that turns off when it is darkest, but the color and the flashing pattern can be changed variously. It may be a little cool if you lower the brightness with a yellow LED. The shaft base of the lower left CTRL keycap appeared to be cracked, and it was easy to disengage. Whether it was cracked at the time of resin molding or when it was handled, it was troublesome to return it as an initial defect in any case, so it was reinforced by combining adhesive and paper. Even if reinforced, it is invisible because it is on the back side and does not affect the LED transmission of the key cap. It's thin and cool, but it's easy to hook the corner key cap when carrying it, and it's likely to break it if you don't think about putting it in a specific pocket of a case or bag.