Customer Reviews

4.85 out of 5
See all 426 reviews
Write a Review
  • All Reviews (426)
  • Image (77)
  • Video (0)
  • All Star
    • All Star(426)
    • 5 Star(390)
    • 4 Star(22)
    • 3 Star(5)
    • 2 Star(3)
    • 1 Star(6)
Sort by:
Top Review
  • Top Review
  • Most Helpful
  • Most Recent
Reviews only from your country (Viet Nam)
|
Show Original

A part of the review has been auto-translated.

  • 31/07/2021

    Very fast delivery to Germany, ordered on 22.07 from stock CN and already received on 30.07, great! Immediately four different batteries connected and charged, the result was very satisfactory, even the old 2200mA 3S battery was perfectly balanced. Then I plugged my self-built 4.200V simulator to all four balancer inputs and compared the displayed voltage values with a Fluke 45, I was pleasantly surprised that the deviation was only 1 to 2mV, The maximum deviation for a single cell was 4mV. VERY GOOD! Pleasant is also that you can switch off the Beeper for the button tones completely and still tones are output at error messages and at the charging end. The fan turns on at 42°C and off again at 40°C, however, is disturbing noisy. I am very happy with the charger and can only recommend it. Very fast delivery to German,ordered y on July 22nd. from CN stock and arrived on 07/30, great! Immediately connected and charged four different batteries, the result was very satisfactory, even the old 2200mA 3S battery was perfectly balanced. Then I connected my self-made 4,200V simulator to all four balance inputs and compared the displayed voltage values with a Fluke 45. I was pleasantly surprised that the deviation was just 1 to 2mV, the maximum deviation for just one cell was 4mV. It is also pleasant that you can switch off the beeper for the key tones completely and it still emits tones for error messages and at the end of charging. The fan switches on at 42° C and off again at 40° C, but it is annoyingly loud. I am very satisfied with the charger and recommend it.

    Comments (1)
    Show Original
  • 14/11/2021

    Super charger for 1S to 4S batteries Since my largest batteries are only 1300 mAh 4S LiPos, the charging power is also sufficient. I always charge with about 1C, so it takes about 45 minutes to charge 4 pcs 1300 mAh LiPos. When I received the device, I made a software update right away. This is very easy and a suitable USB cable is even included. For this you can find the description on ToolkitRC.com The charger itself is of high quality workmanship. Also very practical is the function that it can be operated with mains current but also with direct current. For all those looking for a multicharger and need no more than 4S it is recommended.

    Comments
    Show Original
  • 17/06/2021

    does not work, only one port recognizes the balanced charge, but to charge a single battery takes an eternity, even if you put it to maximum power, and if you charge 4 batteries at the same time, it turns off and on itself, defective product. ... conetti a 2s battery and shows you a 4s, meaningless, not even the high voltage charge does not work..... let's see that they say in assistance, even if you know how it works.... money thrown. ... 😡😡😡😡.

    Comments
    Show Original
  • 25/09/2021

    Very useful functions can be charged 4 batteries at the same time. furthermore the charging can be suspended to be resumed at a later time

    Comments
    Show Original
  • 07/04/2022

    good for charging only below 4S. great to move because XT 60 input! Be careful if you put 4 batteries to charge they are very tight.. provide extension!

    Comments
    Show Original
  • 19/02/2022

    good charger, not very powerful, 100W divided by four plugs. Balancing plug not convenient at all, sometimes the plug is getting out.. I recommend it.

    Comments
    Show Original
  • 17/10/2021

    arrived in a short time, box and content as per description. tried and working. I had some small difficulty attaching the balancer cables in the central sockets in when the pins are crooked law but I solved it with another cable

    Comments
    Show Original
  • 25/01/2022

    The operation of the device is simple and self-explanatory. Have already loaded 4x2s Lipos (LiVH) at the same time and put usage into storage mode. Both worked perfectly. In order to be able to safely charge Lipos, I built a box with activated carbon filter from Fermacell plate, because the opening for the cables in Batsafes is not sufficient in this case. For this reason, I used extension cords that extend all the way into the box. My first impression is positive. It is a space-saving way to load several lipos up to 4s and, depending on use, up to ~1400mah (1c) compared to the manufacturer's specifications).

    Comments
    Show Original
  • 15/07/2021

    I really like the device in general. Huge in size. The overall material quality looks good. The screen is vivid and the interface is user-friendly. It would be great if there was a battery discharge mode. There is only charge and storage mode. It would be great if it was discharge mode. Finally, if there was an on/off button on the machine, we would not have had to worry about the cable getting plugged in every time it was used. Let's see what we will see in long-term use. Best regards.

    Comments
    Show Original
  • 29/09/2021

    Delivery time was good and the charger is really super. Packaging was crushed in the corners but nothing happened

    Comments (1)
    Show Original
Show:

    Total 0 pages

    Go to page

    Go

    You might be interested in

    recommendation for you
    • US$118.99
    • US$24.99
    • US$20.99
    • US$53.99
    • US$57.99
    • US$29.99
    • US$8.99
    • US$39.99
    • US$24.99
    • US$35.99