Customer Reviews

4.93 out of 5
Write a Review
  • All Reviews (15)
  • Image (2)
  • Video (0)
  • All Star
    • All Star(15)
    • 5 Star(14)
    • 4 Star(1)
    • 3 Star(0)
    • 2 Star(0)
    • 1 Star(0)
Sort by:
Top Review
  • Top Review
  • Most Helpful
  • Most Recent
  • floflo
    2016-12-17 14:50:43

    Casse du bouton poussoir de test (réparé) boitier un peu fendillé mais comme il est assez robuste, il a suffisament résisté. Ce n'est pas très grave, mais c'est dommage de devoir réparer les dégats que le transport provoque. Après réparation ce petit testeur est très pratique à utiliser.

  • jeever
    2019-07-31 20:02:54

    Based on the basic diagram of a microcontroller controlled component tester designed by Markus Frejek in 2009, Chinese companies have introduced as many as ten commercial versions to the market. Some are offered as kits, some as ready-made devices. The MK-168 tested in this article is in the middle of this range, both in terms of price and performance. Not expensive, not cheap, not excellent, not bad. A major drawback is that the display is not graphical but alphanumeric and that the symbols of the

  • 2014-05-01 04:22:07

    This is essentially a boxed version of the It comes with a nice ZIF socket and three leads. I think this is the most useful little gadget in my work room. It tells me what the thing is, which leg is which, the key parameters. Perfect for middle aged guys who find it hard to read small writing. Fantastic value. Possible improvements: Three line display, box should not use self tapping screws

  • 2014-08-10 04:06:00

    Well, it has arrived safely from Guangzhou with no additional charges and seems to work quite well. It doesn't recognise capacitors lower than about 27pF and it doesn't measure inductance below 0.03mH. Smaller inductors are seen as resistors. Semiconductors look quite credible. Must check what collector current is used for beta test. I don't have a battery for it so I plugged a wall wart that claims a 9 volt output. The tester checks the "battery voltage" before doing anything and doesn't complain

  • 2016-09-16 11:49:11

    Contento con la compra. Si lo quieres mas barato hay uno parecido en kit. Se alimenta con batería de 9v interna o por medio de un jack d 9v. Para acceder a la batería hay que sacar los cuatro tornillos y es un poco engorroso. No trae instrucciones. Me costo 18$

  • lehaies
    2018-08-30 04:22:42

    Pour vérifier l'état des condensateurs c'est parfait, il donne l'ESR et il reste précis

  • 2017-02-16 16:58:39


  • maxrio
    2017-01-22 08:58:18

    Muito boa qualidade. Funciona perfeitamente conforme descrito.

  • serpol
    2016-12-12 04:38:46

    Спасибо за прибор.

  • 2016-10-03 00:38:57

    Très pratique sur le terrain comme pour bricoler sur un coin de table pour un dépannage improvisé.


    Go to page


    You might be interested in

    recommendation for you
    • Rp456,716.45
    • Rp316,533.19
    • Rp294,265.28
    • Rp562,078.06
    • Rp328,489.12
    • Rp1,643,790.64
    • Rp4,184,425.33
    • Rp1,025,669.17
    • Rp342,985.68
    • Rp535,625.57
    • Rp343,434.03
    • Rp881,600.24
    • Rp134,354.74
    • Rp1,554,121.18
    • Rp337,754.96
    • Rp747,096.05
    • Rp1,494,341.54
    • Rp418,756.38