Answers

thanse5 the user manual say this about the oscilloscope. 1Hz to 5MHz sensitivity is from 50-500mVpp. 5MHz to 10MHz-sensitivity is 500mv to 1Vpp. 10-20MHz sensitivity is 1V-3Vpp. so as you can see the sensitivity falls with increasing frequenzy,this is mainly caused by induction in the test leads at high frequenzy.

Helpful (3)
Submit
Answers (3)

Q: Could I plug in the 110v and paste on the wood or wall directly?

Asked by nelson.aguieiras on 2019-07-09 16:08:56

thanse5 they need cooling so you need to mount them on a heasink.

Helpful (0)
Submit
Answers (2)

thanse5 you have to mount them on a heatsink and use a fan to keep them cool,the better cooling the longer they will last.

Helpful (0)
Submit
Answers (2)

thanse5 you need to divide the rated power by two,this is fairly common with this type of inverters.

Helpful (1)
Submit
Answers (6)

Q: What is the frequency (Hz) for the 110v models?

Asked by Neogator26 on 2021-07-25 10:51:37

thanse5 this inverter will auto adjust to the frequency of your grid and it will auto adjust to the voltage too.MPPT=maximum powerpoint tracking.

Helpful (0)
Submit
Answers (1)

thanse5 the camera is as described and has the speaker and mic as mentioned in the specs.

Helpful (0)
Submit
Answers (2)

Q: is the camera compatible with the SAP HD android software?

Asked by argirisb on 2021-07-12 02:52:06

thanse5 the camera comes with the program i-cam+ ,suported by android but i do not know if it is compatible with SAP software.

Helpful (1)
Submit
Answers (1)

thanse5 from the information i have working range is from -40 to +70C.if you can keep the temperature below 70C the chip will last longer, the lifetime of the chip is 5000+hrs if you have proper cooling,better cooling gives a longer lifetime for the chip.

Helpful (0)
Submit
Answers (2)