All Messages

clue_to_everything check the Thrust produced it should be twice the weight of drone, if it's producing then it can lift else no

2022-01-02 02:08:13 Helpful (0)
Submit
Answers (2)

Q: How many volts minimum and maximum?

Asked by m1s on 2020-02-02 12:26:09

clue_to_everything it starts working at 11.5v at 9v only led will light up but motors won't move at 12v it's the best , max I haven't tested

2022-01-02 02:06:45 Helpful (0)
Submit
Answers (3)

Q: what is a good power supply for this?

Asked by BG103254534 on 2020-09-23 03:35:15

clue_to_everything Use A 12V 10 Amp SMPS , Make Sure The SMPS has fuse for safety

2022-01-02 02:05:06 Helpful (0)
Submit
Answers (13)

Q: can I use a 4s battery? I don't have a 3s

Asked by ItoSan on 2019-02-06 02:59:13

clue_to_everything NO, 4s voltage is very high , however please refer to your flight controller data sheet and check does it have pins for bgc or gimbals , or try to figure out if you can get voltage anywhere between 10-12 volts from your flight controller

2021-09-06 10:02:07 Helpful (0)
Submit
Answers (2)

Q: it come with camera?

Asked by rsen7877 on 2019-09-17 08:48:34

clue_to_everything onlyGimbal is provided , Camera is not included

2021-08-30 07:54:58 Helpful (0)
Submit
Answers (2)

Q: camera is with it??

Asked by Aoyan on 2019-12-03 05:22:14

clue_to_everything onlyGimbal is provided , Camera is not included

2021-08-30 07:54:51 Helpful (0)
Submit
Answers (2)

BG127145371 yes connect the control pin to digital pin on arduino and control it with PWM

2021-08-23 10:43:11 Helpful (0)
Submit
Answers (3)

Q: My gimbal is shaking like hell

Asked by Nitin Gupta on 2018-03-11 07:56:43

BG127145371 solution - kindly attach your camera to the gimbal and balance it in center now place or mount on a level surface and power it on if it still shakes download the GUI and calibrate it to download click on the link given in product description box , right click and click open in new tab it will start downloading

2021-08-23 10:38:59 Helpful (0)
Submit
Answers (4)

BG127145371 yes you can use but be sure to make a research on calibration , adjustments , weight etc else no issues it should work

2021-08-21 01:39:21 Helpful (2)
Submit
Answers (2)

Q: free camera ?

Asked by PrincejayMercedes Capinda Grande Jaire III on 2019-07-02 04:33:11

BG127145371 no you will be getting only gimbal , no camera will be given

2021-08-21 01:38:30 Helpful (0)
Submit
Answers (3)

Lee Before powering up the gimbal, you should install the camera on the gimbal, or it will keep shaking. Also you can try to calibrate it.

2021-07-26 03:46:58 Helpful (0)
Submit
Answers (1)

carlosmcesar Yes No problems. However I prefer the 4S, and the 920 or 980 engines. I have the TBS DISCOVERY and it was good. Hugs.

2021-07-17 10:27:17 Helpful (1)
Submit
Answers (3)