All Messages

Q: can it be used in lenovo zuk z2 pro?

Asked by ITALO on 2018-03-25 07:38:54

Jannis98 It works with every device featuring a usb c charging port

2022-03-05 07:46:02 Helpful (0)
Submit
Answers (1)

Jannis98 It depends on the pitch of the propeller. If you decide for a very low pitch. For like an 8x2" it is possible but otherwise the current will be fairly high which will likely damage the motor

2022-03-05 07:45:22 Helpful (0)
Submit
Answers (3)

Q: Mini or Micro USB the connection port?

Asked by damphase on 2021-12-08 06:32:59

Jannis98 My boards all came with micro USB but I wouldn't be surprised if they are inconsistent and some come with mini USB instat.

2021-12-08 06:56:02 Helpful (1)
Submit
Answers (3)

Q: what's the difference between v1 and V2?

Asked by msachau on 2020-10-02 01:33:05

Jannis98 They are entirely different. On the outside you notice that the color pattern has changed and the winding is not golden in V2. The stator as well as the bell are taller. The "custom silicon wires" are only ordinary once anymore. Furthermore I noticed that the screws securing the bell are only tightened poorly and not secured at all on some motors. Please check the motor or it might fall apart midair.

2021-01-23 06:53:06 Helpful (0)
Submit
Answers (2)

Q: Does it have a xt60 connector?

Asked by BG523217393 on 2021-01-22 10:58:25

Jannis98 It comes with a XT60 connector but you can install whatever you want to. It is only the frame. No PDB, ESC and so on

2021-01-23 02:00:19 Helpful (0)
Submit
Answers (2)

Q: Support Red Mi Pro?

Asked by kisakul on 2018-03-26 12:56:44

Jannis98 Itis an ordinary USB Type C cable. So far it worked with every device I tried.

2020-12-01 04:53:04 Helpful (0)
Submit
Answers (1)

Q: will this fc work with spectrum reciver?

Asked by Kanadak on 2020-12-01 04:37:03

Jannis98 Yes, it will work with a spektrum satellite receiver. Since you need a sum signal (for example SBUS) you cannot use an ordinary receiver with PWM output only. The satellite receivers will work just fine. I am using this combination myself.

2020-12-01 04:51:46 Helpful (0)
Submit
Answers (2)

Q: Is this analogue or digital?

Asked by BG185536105 on 2020-11-15 10:11:06

Jannis98 Analog. Digital vtx are still very rare

2020-11-17 11:42:11 Helpful (0)
Submit
Answers (3)

Jannis98 It is compatible. Both support the D8 protocol

2020-11-17 11:41:35 Helpful (0)
Submit
Answers (3)

Q: what is the h.p. of this engine.

Asked by gwb123 on 2020-09-07 01:00:51

Jannis98 According to the product description it is 2.6hp

2020-11-15 01:16:26 Helpful (0)
Submit
Answers (2)

Q: How to change the colour of the LED?

Asked by 3DFlyZone on 2020-06-22 06:54:33

Jannis98 Use the BLHeli_32 Suite. You can switch on red, green and blue and create mixed colors.

2020-10-19 07:39:19 Helpful (0)
Submit
Answers (2)