Customer Reviews

4.91 out of 5
See all 511 reviews
Write a Review
  • All Reviews (511)
  • Image (90)
  • Video (2)
  • All Star
    • All Star(511)
    • 5 Star(480)
    • 4 Star(23)
    • 3 Star(4)
    • 2 Star(0)
    • 1 Star(4)
Sort by:
Top Review
  • Top Review
  • Most Helpful
  • Most Recent
Reviews only from your country (Indonesia)
Show Original

A part of the review has been auto-translated.

  • 03/08/2021

    Excellent product for this price! Guess I'll order another one soon. I saw some of you have issues with welding quality. I will teach you two tricks to have perfect welds. 1. The first trick is to grind the weld pins, check the images. 2. The second trick is, DON'T APPLY FORCE when welding. You just have to be sure the nickel touches the battery, put one pin on the nickel strip and with the second pin just touch the strip and wait for the weld. Note: if you don't use the device for 5 days, it will automatically discharge the battery.

    Comments (1)
    Show Original
  • 22/10/2020

    Very fast shipment and good quality. Many friends here have complained about the manual which is in Chinese. So I tried to translate the manual using online translation. Please check the photos. If it is not very clear, just take a screenshot and then zoom in to see better. Sorry for the low quality, but that's the best possible. Hope it is helpful

    Comments (2)
    Show Original
  • 22/01/2021

    A pulse is the solder is done! Show. I bought a 10m roll. The instructions are completely Chinese but for me it was easy to understand the operation. Hold the button and it goes into ON. Green LEDs mark the charge, of the internal battery. Every 2-3 sec you hear a beep, at that time by current pulse then eye not to short circuit. While it beeps the LEDs turn red and only those of the chosen power level are turned on. After it is in On press 2 times the button to switch to the power choice. Each pressure increases from 1 to 4 The red LEDs that indicate the chosen power. Press the button 2 more times to return to pulse working mode. Press and hold the button to turn off. Nice purchase!

    Show Original
  • 15/12/2020

    Perodotto very simple to use. The single button on the front controls everything from power on to power selection. The cables of the tips are short,creating some hindrance in use. At home I only had 1mm strice and they were perfectly welded, if it had to weld even thicker strips, it deserves the upgrade to 5 stars.

    Comments (1)
    Show Original
  • 29/12/2020

    Arrived from within EU in 3+ weeks. Made some test welds and this device has a big punch already on level 2 of power. The leads are little short but managable; they are insulated with clear silicone tubing on the copper part! Arrived with manual in chinese only. I used the instructions in item description above and they are on spot. Arrived with 4m 0.1x8mm nickel strip.

    Show Original
  • 02/03/2021

    Ordered to collect the destination money from China for the first time, ordered to wait until I forgot to think that I would not send it. Liked 😊

    Comments (3)
    Show Original
  • 09/01/2021

    I took it as an experiment. For the time being, I am satisfied with the result, the battery-tape connection is correct. I'm gonna push it two times to one point, so it's gonna hold it a little harder for the battery. Since it will work well, in many cases it is necessary to tear it off by force, sometimes the piece of the tape remains on the battery. The surface should be cleaned or it will not heal properly. I bought a USB-C. We'll find out how the battery will sustain the effect in the longer term. What's worth paying attention to is the charge. The battery has a stronger self-discharge, it is worth taking it out every 2 months to see if it is not dead. I didn't count the amount of soldering points, I pressed quite a lot of points when making a bottle cap, a 5 cell li-ion pack was connected in parallel.

    Show Original
  • 14/04/2021

    On Saturday, the GLS came in. She came dead. I had to reload. It works perfectly. I ran a Cr2032 battery right away. You can download the manual, but I watched the video. I used the points and came out to about 1000,-Kč.

    Show Original
  • chjVIP3

    Works perfect for making solder spots on lithium cells! Comes with some nickel strip (0.1x8mm). I have used highest grade (4) for my test and the result is quite well (see pictures).

    Show Original
  • 21/11/2020

    perfect packaging. has safety features. but one problem. the attached type c cable is cheap quality. it’s so tight and it might break or damage the input of the device. don’t use it. use another cable

    Show Original

    Total 0 pages

    Go to page


    You might be interested in

    recommendation for you
    • Rp200,960.56
    • Rp173,093.26
    • Rp74,264.91
    • Rp93,800.75
    • Rp316,882.77
    • Rp82,740.02
    • Rp468,429.15
    • Rp55,878.24
    • Rp1,960,909.63
    • Rp229,689.73
    • Rp133,159.71
    • Rp909,709.23
    • Rp588,804.38
    • Rp84,463.77
    • Rp2,973,325.65
    • Rp813,897.44
    • Rp172,231.39
    • Rp2,815,458.85