26.5*26.5mm NameLessRC AIO412T F411 Flight Controller MPU6000 2-4S HV 5V/2.5A BEC
A part of the review has been auto-translated.
Very good 2s-4s (not 1s compatible!) AIO flight controller and perfect match for toothpick 3 (TP3) or similar copters. Performance gets even better if RPM filtering is used via JESC. But be careful to use the correct firmware version for the ESC (FET deadtime not marked correctly from factory - refer to brushlesswhoop.com for details). Recommended!
comfortable and simple
solid AIO FC for small money Perfect for toothpick build
well packed. fast delivery. and id tried it and works perpectly
running on a Betafpv Knight 4 inch frame. total weight w/battery under 200g. can add GPS & R9 for some distance sub 250g. hover using 550mah 4s: 12min
used with mostly old/existing parts. diatone 3” frame Happymodel 1103 7000kv eachine 400mw VTX Caddx Eos2 D8 receiver 75mm Ldarc props with 300mah 2S, 7min hovering with 400mah 3S, 7min hovering < — old 3S flys very well... agile & fast. not. fan of high winds.
Great board for toothpick
FC very good to build your toothpick, large pads and very easy to weld.
Fast shipping, Super quality!
Good fc, for building my toothpick.