👍👍👍 excellent! everything as ordered! I recommend!

👍👍👍 отлично! всё как заказывал! Рекомендую!

👍👍👍 excellent! everything as ordered! I recommend!

Very good

Bardzo dobre

Very good

Everything arrived in good condition. I inspected the inside of the cylinder and saw metal curls from the machining process. I removed and sanitized the cylinder before filling. The harness is ok, but lacks adjustability. I used some purchased backpack straps to speed up the adjustment process. I would have loved to see the tank be standard scuba valve threads, but they were m18x1.5mm. A tough valve to find if you ever wanted to go with a standard scuba first stage. The pressure gauge hose is too short and it could be a bit larger display for reading while under water. Not sure on the pressure gauge threads as I will probably replace it. The regulator, valve and tank all function as they should under water did a few dives around 16ft. I would say I hot around 30 minutes of dive time. I needed to add more weight so I might get a bit more if I was neutrally buoyant. Over all I reccomend the product for someone who has scuba knowledge. If there us anyway to find the thread sizes for the pressure gauge aside from taking it apart I would like that info.

Everything arrived in good condition. I inspected the inside of the cylinder and saw metal curls from the machining process. I removed and sanitized the cylinder before filling. The harness is ok, but lacks adjustability. I used some purchased backpack straps to speed up the adjustment process. I would have loved to see the tank be standard scuba valve threads, but they were m18x1.5mm. A tough valve to find if you ever wanted to go with a standard scuba first stage. The pressure gauge hose is too short and it could be a bit larger display for reading while under water. Not sure on the pressure gauge threads as I will probably replace it. The regulator, valve and tank all function as they should under water did a few dives around 16ft. I would say I hot around 30 minutes of dive time. I needed to add more weight so I might get a bit more if I was neutrally buoyant. Over all I reccomend the product for someone who has scuba knowledge. If there us anyway to find the thread sizes for the pressure gauge aside from taking it apart I would like that info.

Everything arrived in good condition. I inspected the inside of the cylinder and saw metal curls from the machining process. I removed and sanitized the cylinder before filling. The harness is ok, but lacks adjustability. I used some purchased backpack straps to speed up the adjustment process. I would have loved to see the tank be standard scuba valve threads, but they were m18x1.5mm. A tough valve to find if you ever wanted to go with a standard scuba first stage. The pressure gauge hose is too short and it could be a bit larger display for reading while under water. Not sure on the pressure gauge threads as I will probably replace it. The regulator, valve and tank all function as they should under water did a few dives around 16ft. I would say I hot around 30 minutes of dive time. I needed to add more weight so I might get a bit more if I was neutrally buoyant. Over all I reccomend the product for someone who has scuba knowledge. If there us anyway to find the thread sizes for the pressure gauge aside from taking it apart I would like that info.