Customer Reviews

4.88 out of 5
See all 483 reviews
Write a Review
  • All Reviews (483)
  • Image (47)
  • Video (0)
  • All Star
    • All Star(483)
    • 5 Star(437)
    • 4 Star(40)
    • 3 Star(3)
    • 2 Star(0)
    • 1 Star(3)
Sort by:
Top Review
  • Top Review
  • Most Helpful
  • Most Recent
Reviews only from your country (Viet Nam)
|
Show Original

A part of the review has been auto-translated.

  • 18/08/2015

    I used this module to build a variable power supply. I use an input voltage of 12 volts (from a computer power supply) and need this module to create a variable (settable via the potmeter) output voltage ca 1 - 30 volt. With output voltages over 12 volts everything works fine. In the step down mode (voltages below 12 volt) the output voltage is not stable. For instance if I set the output voltage to 5 volts and apply no or very little load, then the outputvoltage "swings" between 4.8 and 5.3 volt. This only stops if I apply a larger load that draws at least 500mA of current.

    Comments
    Show Original
  • 09/05/2021

    Order on time and well packaged. I tested it with my countertop source and put a multimeter on the exit and set it for a low tension outlet. It didn't warm up. But I would recommend the utmost care not to reverse the entry tensions because it can give rise to problems. Very small and very compact. I recommend this article. Look at the photos and like.

    Comments (1)
    Show Original
  • 24/05/2020

    Great product. I used it to build a bench power supply with 2 variable channels and it works fine.

    Comments
    Show Original
  • Antonin
    FR
    11/07/2020

    Very good, ship with anti-static bag. Product was packed properly. Line regulation is good, tested with 5-30v in input, and 2A load. Suitable for led, or no analog device without filter. Current limitation work fine. I'm bit disappointed on capacitor choice. They are 105degree ones, but only 35V. 50v ones would have allowed a better lifespan.

    Comments
    Show Original
  • 29/08/2017

    This is excellent step-up/step-down converter, that can be used for simple bench power supply. Replace variable resistors with these panel mounting 250 KOhm potentiometers ( http://bit.ly/2wOHvro ), add solid power supply ( http://bit.ly/2wOrJfY ) voltage/current monitor ( http://bit.ly/2wOrWjg ) and put everything in a nice box ( http://bit.ly/2wOHVOu )

    Comments
    Show Original
  • 24/10/2016

    Seems to work well. I will use it to have a portable power pack for all situations (recharge PC, drone Lipos, etc.). Will see how it hold up in time.

    Comments
    Show Original
  • 08/08/2017

    this converter can help you in solving many power supply problems. it is able to increase or decrese the voltage at its output terminal compared to the input voltage. the output is quite stable with the load change and the multi turns trims help you in adjusting the output voltage level and the max output current as per your needs. One of the thermal pad below the MOSFET was slightly out of position, but I solved this issue very quickly - check the pads before power up the circuit. good value for money. suggested questo convertiore permette di aumentare o diminuire la tensione in uscita rispetto al valore della tensione di ingresso. la tensione di uscita è stabile rispetto alle variazioni della corrente del carico. i trim multigiri permettono una buona regolazione della tensione e della massima corrente di uscita. Un MOSFET aveva il pad termico leggermente fuori posto, ma ho risolto velocemente il problema. suggerisco un controllo dei pad termici prima di dare tensione al circuito ottimo valore per il prezzo. suggerito

    Comments
    Show Original
  • 23/06/2017

    I am using this to boost battery voltage to supply power into a class D amplifier. Now I can use full volume without clipping.

    Comments
    Show Original
  • 05/07/2016

    Преобразователь из низкого напряжения от 1.5 вольт может заряжать аккумулятор 12-24 вольта,правда при этом достаточно сильно греется.

    Comments
    Show Original
  • 15/05/2019

    Works great and it doesnt heat up. Used a 12V SMPS with this and can only reach 1.1V - 29V. I hoped to reach 30V but this has the best value for buck boost converters here. 5 stars!

    Comments
    Show Original
Show:

    Total 0 pages

    Go to page

    Go

    You might be interested in

    recommendation for you
    • US$9.99
    • US$4.99
    • US$5.77
    • US$31.99
    • US$7.52
    • US$6.99
    • US$9.99
    • US$5.94
    • US$3.99
    • US$8.99
    • US$10.99
    • US$10.88
    • US$19.99
    • US$109.99
    • US$25.99
    • US$3.99
    • US$22.65
    • US$16.49