Using this with my K-Bar and then V-Bar software. Working great.

Using this with my K-Bar and then V-Bar software. Working great.

Using this with my K-Bar and then V-Bar software. Working great.

it connects directly with my phone and kbar

it connects directly with my phone and kbar

it connects directly with my phone and kbar

It has arrived in good condition and is finished clean. The solder joints and components are of good quality. I chose this part because it is cheaper than the other versions. I will install other connectors anyway to use the part otherwise. Unfortunately it has not yet come to use because parts of Banggood are missing. After a thorough search in the WWW habe I also found usable drivers and firmware. If everything is as good as the price there is nothing to fault with.

Es ist in gutem Zustand eingetroffen und ist sauber verarbeitet. Die Lötstellen und Bauteile sind von guter Qualität. Ich habe mich für dieses Teil entschieden weil es günstiger ist als die anderen Versionen. Ich werde sowieso andere Anschlüsse montieren um das Teil noch anderweitig zu verwenden. Leider ist es noch nicht zum Einsatz gekommen weil noch Teile von Banggood fehlen. Nach gründlicher Suche im WWW habe ich auch brauchbare Treiber und Firmware gefunden. Wenn alles so gut ist wie der Preis gibt es nichts zu bemängeln.

It has arrived in good condition and is finished clean. The solder joints and components are of good quality. I chose this part because it is cheaper than the other versions. I will install other connectors anyway to use the part otherwise. Unfortunately it has not yet come to use because parts of Banggood are missing. After a thorough search in the WWW habe I also found usable drivers and firmware. If everything is as good as the price there is nothing to fault with.

Resolveu meu problema de acesso remoto ao drone. Hoje não preciso mais conectar ao Mission Planner pelo USB. Uso o APP Tower. Lebrando que precisamos ter também um FTDI adapter para o setup inicial.

Resolveu meu problema de acesso remoto ao drone. Hoje não preciso mais conectar ao Mission Planner pelo USB. Uso o APP Tower. Lebrando que precisamos ter também um FTDI adapter para o setup inicial.

Resolveu meu problema de acesso remoto ao drone. Hoje não preciso mais conectar ao Mission Planner pelo USB. Uso o APP Tower. Lebrando que precisamos ter também um FTDI adapter para o setup inicial.

Посылка пришла за 18 дней. Модуль порадовал ( маленький ). Соединение с смартфоном без проблем а вот с ноутом пока не получилось. Будем бороться. Спасибо BG. Рекомендую.

Посылка пришла за 18 дней. Модуль порадовал ( маленький ). Соединение с смартфоном без проблем а вот с ноутом пока не получилось. Будем бороться. Спасибо BG. Рекомендую.

Посылка пришла за 18 дней. Модуль порадовал ( маленький ). Соединение с смартфоном без проблем а вот с ноутом пока не получилось. Будем бороться. Спасибо BG. Рекомендую.

gran artículo y de pequeño tamaño. no presenta mayor problema la instalación

gran artículo y de pequeño tamaño. no presenta mayor problema la instalación

gran artículo y de pequeño tamaño. no presenta mayor problema la instalación

Good for Pixhawk setting in terrain.

Good for Pixhawk setting in terrain.

Good for Pixhawk setting in terrain.

they are SPP-C HC-06 / BT06 HC-06 Features the Beken BK3231 chip which is a Bluetooth 3.0 HID device. Bluetooth v2.1 + EDR Default baud rate is 9600. Default PIN is 1234. Firmware is BOLUTEK Firmware V2.2, Bluetooth V2.1 so AT+HELP gets you a list of the available commands.to get AT commands open the serial monitor and then cycle the power to the module

they are SPP-C HC-06 / BT06 HC-06 Features the Beken BK3231 chip which is a Bluetooth 3.0 HID device. Bluetooth v2.1 + EDR Default baud rate is 9600. Default PIN is 1234. Firmware is BOLUTEK Firmware V2.2, Bluetooth V2.1 so AT+HELP gets you a list of the available commands.to get AT commands open the serial monitor and then cycle the power to the module

they are SPP-C HC-06 / BT06 HC-06 Features the Beken BK3231 chip which is a Bluetooth 3.0 HID device. Bluetooth v2.1 + EDR Default baud rate is 9600. Default PIN is 1234. Firmware is BOLUTEK Firmware V2.2, Bluetooth V2.1 so AT+HELP gets you a list of the available commands.to get AT commands open the serial monitor and then cycle the power to the module

bien reçu k8 v8 kbar pixhawk flight control bluetooth,reste a l'essayer.

bien reçu k8 v8 kbar pixhawk flight control bluetooth,reste a l'essayer.

bien reçu k8 v8 kbar pixhawk flight control bluetooth,reste a l'essayer.

Arrived quick, not tested yet. Please note: this does not look like the photo shown on the product page for the KBar version as it is shown with four separate wires, this is a normal plug with four wires. I'll update this review when I have tested it. (if i can)

Arrived quick, not tested yet. Please note: this does not look like the photo shown on the product page for the KBar version as it is shown with four separate wires, this is a normal plug with four wires. I'll update this review when I have tested it. (if i can)

Arrived quick, not tested yet. Please note: this does not look like the photo shown on the product page for the KBar version as it is shown with four separate wires, this is a normal plug with four wires. I'll update this review when I have tested it. (if i can)