All Messages

JakeEri 16/08/2024
Delivery was fast, 6 days from CZ to FIN. Quite well packaged in to two carton boxes. Overall nice looking jet with reasonably smooth foam and paint. Clear canopy / hatch is nice and it’s attached with magnets. But.... * PNP build quality is poor and its not plug and play it’s more like ARF almost ready to fly. * Position of the horizontal stabilizers are crooked and not symmetrical. * Wings has no spar what so ever! They're probably not going to hold in tight turns. They has to be glued on so you can't disassemble them for transport and storage. * Jet is clearly made for 64mm EDF! The 70mm EDF is too large in the thrust tube. * EDF is not seated well and the hatch bulge out. * Motor is not Hookll inrunner as in the pictures But a cheap outrunner. * ESC is not attached in any way and rattles around in the jet. * Hard plastic nosecone, although quite thick. No magnetic attachment. Nose will not survive a hard landing. * Exhaust "nozzle" is very thick foam and looks ridiculous. * Fins under the fuselage are foamboard covered with thin plastic and so are the missile pylons. * There are no missile pylons for the wing tips. * The landing gear is aluminum and tires are soft. So they're good for some other plane but not for this one. This jet is the first Hookll plane for me and I'm not impressed. I guess you can't get good for cheap. It is not for a beginner but for seasoned model builder who can fix all those things. I would not recommend this for a first jet. It will be good after solving all those issues. Or you could accept the flaws and send it as is and hope it last for a few flights at least.
1
Recommendations
Comments (3)

JakeEti Don't worry. It can be made better if you have a little bit of previous building experience and skills to do so. I'm sure you can glue the wings etc. , fix the ESC in place and put the receiver in, check the CG and fly. Those were my observations about the quality. I guess my expectations were too high about this jet.

JakeEri 16/08/2024
Delivery was fast, 6 days from CZ to FIN. Quite well packaged in to two carton boxes. Overall nice looking jet with reasonably smooth foam and paint. Clear canopy / hatch is nice and it’s attached with magnets. But.... * PNP build quality is poor and its not plug and play it’s more like ARF almost ready to fly. * Position of the horizontal stabilizers are crooked and not symmetrical. * Wings has no spar what so ever! They're probably not going to hold in tight turns. They has to be glued on so you can't disassemble them for transport and storage. * Jet is clearly made for 64mm EDF! The 70mm EDF is too large in the thrust tube. * EDF is not seated well and the hatch bulge out. * Motor is not Hookll inrunner as in the pictures But a cheap outrunner. * ESC is not attached in any way and rattles around in the jet. * Hard plastic nosecone, although quite thick. No magnetic attachment. Nose will not survive a hard landing. * Exhaust "nozzle" is very thick foam and looks ridiculous. * Fins under the fuselage are foamboard covered with thin plastic and so are the missile pylons. * There are no missile pylons for the wing tips. * The landing gear is aluminum and tires are soft. So they're good for some other plane but not for this one. This jet is the first Hookll plane for me and I'm not impressed. I guess you can't get good for cheap. It is not for a beginner but for seasoned model builder who can fix all those things. I would not recommend this for a first jet. It will be good after solving all those issues. Or you could accept the flaws and send it as is and hope it last for a few flights at least.
1
Comments (3)

Q: can i use it for tmotor mn*****kv 6s?

Asked by BG354220335 on 2024-01-18 11:57:49

JakeEti It says in the description 2-4S

2024-08-19 11:14:05 Helpful (0)
Submit
Answers (1)

Q: this battery work with the 2024 mobula6?

Asked by BG165525161 on 2024-05-13 10:43:02

JakeEti It says in the description mobula6

2024-08-19 11:13:09 Helpful (0)
Submit
Answers (1)

JakeEti Probably. It depends on the size of the battery. Ofcourse you can modify the fuselage for your needs.

2024-08-19 11:12:10 Helpful (1)
Submit
Answers (1)

Q: No rudder channel ?

Asked by pidi52 on 2021-07-20 09:34:33

JakeEti No rudder. It fly good without but you can fit one if you like.

2023-09-15 10:37:57 Helpful (0)
Submit
Answers (4)

Q: So it is 10x Female Plugs and 10x Male Plugs right?

Asked by ben.steinmaurer on 2023-07-29 12:06:54

JakeEti Right.

2023-09-15 10:36:04 Helpful (0)
Submit
Answers (1)