All Messages

Thor0001 20/11/2021
Design and first impressions It’s a pretty interesting question, the design itself here doesn’t even think it matters, but the function is the point. But one thing I can’t go by is that the product is very badly arranged in the box. Before unpacking, I noticed that the product was ringing, with every little part moving in it. (bolts, nuts, wrench). It would have fit in the space provided below. Although there is foil on the display and the solar cell, the moving parts, for example, are the key, it could even have been scratched. Test run It was a pretty interesting start. As a naive, I looked at the instructions for use exceptionally (I admit I don’t look at anything, but here I gave him a chance), unfortunately it was a shame, the description wasn’t clear, especially the removal of the little plastic protector. Nah but our test subject was an Opel Zafira A, after removing the plastics, the equipment could begin. Screw the nut onto the valve, using the key we have to pull it onto the sensor at the end this will prevent it from being stolen. Be careful, because if you leave, sawing the valve cap may come. When done everything could come from pairing the central unit with the valves. We wanted to do this in the car for the first time, but we didn’t manage to recognize all of the valves, so we grabbed and took the unit to the valve to see if it worked after a long push. After pairing, you can also set the units and alarm rates, minimum, maximum After a week we were lucky to experience the fault signal, the pressure in the rear wheel dropped and the device started to beep terribly, you can turn it off by turning off any button. Evaluation Overall, I am satisfied with the device, I dare to recommend it, which is mainly confirmed by the fact that the said test subject was my brother-in-law, who is not a rubber by the way. In conclusion, I would like to thank Banggood for submitting the product for testing. Youtube test link:https://youtu.be/w-he9H7mbow
4
Recommendations
Comments (0)

Thor0001 Infelizmente,n.Cq taxa de atualizaç.B.C3#3^BSSD2hgso pode comprar o monitor aqui, mas a lBRNBRsNB.C3#3_CS8gBSbNCC3#3^Bsd

2022-04-05 10:53:56 Helpful (1)
Submit
Answers (1)
Thor0001 25/03/2022
Introduction Although we already live in a world where our phone is connected to our car, the car holder still plays a decisive role. Many people still love it, because even though they can connect their phone to their car and see everything there, they like to stay with the old habit. I get in the car, put my phone in the holder and then push there if I need to, and look at the map during my travels. So we can say that the handy gadget that holds the smartphone remains, which fits in any car, not to mention that many of us don’t have a screen in our vehicle. We have now examined the BlitzWolf BW-CW5, which has a wireless charge of up to 15 W. The BlitzWolf holder is made of opaque thermoplastic, which means it’s relatively light, but I wouldn’t classify it as very light. Design and first impressions I can’t say too much about the design, there are a lot of different types of car mounts on the market and they almost all look the same one by one. In the middle is the BlitzWolf logo, with gripping arms on both sides and a fine rubber cover. On the back there is a holder that can be loaded on the ventilation slats or on the window, which we decide which one to use, and on it we can stabilize it with the usual small rotating part after adjusting it in Design and first impressions I can’t say too much about the design, there are a lot of different types of car mounts on the market and they almost all look the same one by one. In the middle is the BlitzWolf logo, with gripping arms on both sides and a fine rubber cover. On the back there is a holder that can be loaded on the ventilation slats or on the window, which we decide which one to use, and on it we can stabilize it with the usual small rotating part after adjusting it in the right direction. In the case of a bracket to be placed on a window, it is important to mention that it is possible to adjust the inclination once and to adjust the length of the bracket itself by means of a screw. The back is pretty solid....
1
Recommendations
Comments (0)
Thor0001 28/03/2022
0
Recommendations
Comments (0)
Thor0001 28/03/2022
Introduction In some households, low humidity is a problem, especially in winter, while in others it is too high. The ideal range is usually 40-60%. Higher humidity increases the risk of bacteria and fungi multiplying. And that's exactly what the high-performance Xiaomi Widetech dehumidifier, which can absorb up to 18L of moisture in 24H, can effectively prevent. A little bit about what you know about the device Thanks to the high power of 240 W, the dehumidifier can "pump out" up to 24 liters of water from the room air in 18 hours. For example, storing it in a 250 ml plastic bottle could cause up to 72 pieces to come out. The device can reduce humidity in a room of 5-40 square meters. Its water tank is 2.7 liters. The dehumidifier Xiaomi NEW WIDETECH Smart Dehumidifier is a smart dehumidifier! You can safely turn it on even after washing washed clothes, because it can also bind the steam after washing, thus helping the clothes to dry faster! Of course, it can be connected via the Mi Home app to control fineness and access various functions! If you have Xiaomi Xiaoai speakers, you can even control it by connecting to it. The machine will switch off automatically as soon as the water tank is full and it will also appear on the screen as a warning! Design and first impressions I honestly admit to him as well as the previous test I was really looking forward to because he knows more than his predecessor. This came to the family to order, but once it came I tested it as well. I don’t want to shoot the joke, but like the previous one, the same one was received here. Nicely wrapped, not back and forth, everything has its place. There was a beauty flaw here as well, if you remember it was the same as the previous one, the cover that came with the device, which we can pull on if we don't use it for a long time, well it was crumpled the same way! Test run The Xiaomi Widetech Dehumidifier offers 5 modes and 3 speeds. Another advantage is that the device can dehumidify at...
0
Recommendations
Comments (0)

Q: hi, how much is its capacity?

Asked by BG561511411 on 2022-03-28 07:38:17

Thor0001 1500ml that you can pour into it

2022-03-28 08:54:05 Helpful (1)
Submit
Answers (1)
Thor0001 24/03/2022
Introduction We’re never too old for a little play. I don’t know you are with him, but I’ve always been haunted by RC madness somehow. Be it a small car, a boat, or an airplane, I just love it. Exceptionally, I didn't buy this car for myself now, it will be a gift to the family, but once it's here, I've unpacked it and looked at what it knows! A little bit about what you know about the device The car itself has a ratio of 1/14, according to the description it can run at 25-30km / h, unfortunately there was no traffic during the testing 😊 so I can't confirm or deny this, it goes like lime. The remote communicates on a 2-channel 2.4G, we'll also need 4 AAA batteries, it's not included in the package, so get it before the test! Design and first impressions White box, which is infinitely simple, has a logo and a picture of a car on it, the car and accessories are well packed, also fastened with a fastener so that it doesn't move even accidentally, nothing breaks during transport, it's a very big red right for them. The package also includes spare parts, 2 shock absorbers and hood clamps. At first glance, it has such a crappy cheap plastic feel, but it didn’t break hard enough during the tests, even though it got cold heat, even if it was a gift: D Test run We charged it for sure, we only got one usb cable, we have to plug it into any charger at home, it charged nicely from 0 in about 2 hours and we played with it for about 14-16 minutes in a variety of terrain conditions, which means that it had a track built of land, a concrete yard, and a tile. The lights are on, although this is obviously only good for kids, as we don’t compete with it in the evening, which is a problem that can’t be turned off, so they also keep eating the battery. The battery is also held in place by a small screw, but we can easily unscrew it with the included screwdriver. The car’s rear-wheel drive responds very quickly to the remote control, tile catches smoothly in the event of....
0
Recommendations
Comments (0)
Thor0001 22/03/2022
The technique It does not contain any technical inventions or achievements. A simple structure made of screws and steel, which is screwed to the wall to get a good little projector holder for very cheap Hungarian money! Design and first impressions The usual BlitzWolf brown box, we don't get anything else when opened, it's a simple and inexpensive solution, no separators, no separators, everything is worth it, and if it is tossed, the paint may be a bit shabby and defective at best. Aside from that, I can't say bad things at first, it's put together, it's a solid structure. Test run Since it comes in pieces, we have to put it together, but it's not so devilish, (ed. So we also have help with the user manual, which is written in several languages. The package contains the upper part, which is fixed to the wall, then the “rod” that regulates the height and extension, which allows 21-32 cm of horizontal and 43-65 cm of vertical extension, there is also room in the package for right-left and up -le 30-degree adjustable, rotatable part responsible for the decision, in addition to the necessary screws, dowels, which we do not use, because there is also a concrete and Allen key in the set (there is no star screwdriver, but you will need it if you choose that screw). ) and two types of projector arm, one shorter and one longer. You may have read above that I put everything together nicely and the projector is only over when I see that the X brackets should be tightened, which of course you can't access once you've put together the screws needed to fix the part responsible for the decision. I took it out for about half a minute, put it on a projector, then back to that part and we were done. It reminds me… I fix it on the ceiling, but during the assembly I made it for the “wall version” first, tightened the screws, and then when I realized...
0
Recommendations
Comments (0)
Thor0001 22/03/2022
The technique Nothing extra is really packed in, no nonsense, cleverness, a battery, a collector for lint and the rotating brush itself that is responsible for removing lint. Design and first impressions We really have nothing to say about the box, with the usual white packaging product image. The color is white natural, nothing extra and no fuss, the Xiaomi logo on the back and the power button. The package included a device, a usb cable, instructions for use and a small cleaning brush instead. At first glance, it’s a small skillful-clever machine that fits in a very light, small space, wherever we can take it with us. Test run I named him the little greedy during testing, at the beginning is a 0.35mm thick micro-curved steel mesh that protects our knife and clothes. Below this are the 5 blade heads. I named its greed because of its suction power because this small device has suction power, the negative pressure centrifugal fan has blades that exert a coarse suction force. The fluff container, thanks to its P-shape, prevents the fluff from "returning" to the blades. The small one has a 1300mAh battery that can be recharged in 2 hours when fully discharged. During operation, if you remove the lint holder or the blade guard, the machine will detect (small microswitch) and stop itself, thus avoiding injuries. The cleaning brush has finally been given a normal size, no need to stuff my big finger into the small openings. Luckily, they put a small window on the lint where we can see how much is in it when it needs to be emptied. It is very easy to use with nothing extra, you turn it on and you start to pull the tool along the fluffy surface and you already take off (the knives “shave”) the lint from the textile. Evaluation The important thing is that this is not an industrial stuff, that is, it will not remove the lint from anything on the t-shirt in half a minute, I have to work with it, I tried it on a t-shirt during testing, it took 15 minutes before I took.....
0
Recommendations
Comments (0)