12V DC 80x100mm 20W Flexible Waterproof Silicon Heated Bed Heating Pad For 3D Printer
A part of the review has been auto-translated.
Very nice heater pad. Flexible, heats rapidly. 15W on a 3s lipo, cold resistance of 7 ohms.
I used it for the heater of a small greenhouse. It is good.
Obtained relatively quickly of good quality until tested. Well, hopefully all is well.
excellent small heating pad
Bought 2 pcs. Measured resistance about 7 Ohms (6.7 and 7.2) so the power is as described @12VDC = about 20W. Going to make diesel preheater (needs 12V temperature controller to switch heater on at very low temperature).
hooked it up to 6volt, it got hot as buggery, turned it back to 3volts, just right
It will be use on a school proyect and we'll see how works together with the heatsink, looks good Thanks BG
as expected the product is working fine , my project is to maintaine a block for 37°c as for it is working good for 12v
The goods arrived very quickly. I tested it, it works. Thanks Banggood.
i build a lipo head suitcase with that add a w1209 and woks fine till today