Customer Reviews

4.8 out of 5
See all 403 reviews
Write a Review
  • All Reviews (403)
  • Image (96)
  • Video (1)
  • All Star
    • All Star(403)
    • 5 Star(366)
    • 4 Star(20)
    • 3 Star(2)
    • 2 Star(3)
    • 1 Star(12)
Sort by:
Top Review
  • Top Review
  • Most Helpful
  • Most Recent
Reviews only from your country (Lao People's Democratic Republic)
Show Original

A part of the review has been auto-translated.

  • 21/02/2021

    Best LASER in price range and probably best of all, ORTUR is way behind this beast. Just look at my first attempts, and I am completely a beginner.. Extreme power, precize dot beam. Robust quality construction, Everything operates smoothly, nothing is overheating, the eagle on the pic is 11,5 cm diameter, only 1pass, took an hour to complete, just astonishing result for laser that cheap. the face is on cardboard, didnt have more wood :D but perfect results. Guys I can recommend it, you will be amazed, ATOMSTACK and Banggood thank you for such great product. It is worth every eurocent

    Comments (10)
    Show Original
  • 07/09/2021

    product is quite successful. a machine that can meet most of my expectations. And the installation is quite simple. It's been about three months since I've had it, I've had no trouble. even though I'm tired

    Comments (23)
    Show Original
  • 04/07/2021

    Received within 2weeks to Canada, item as described exept the laser point is defenitly not square, its just like Any other diode laser engraver Brand, the point is larger on one Side than the other. with this Said it Works great nonetheless Very good engraving capability as well as cutting wood i love it, just wish that the laser focus was as advertised

    Comments (2)
    Show Original
  • 05/09/2021

    Software used: LaserGRBL I bought WAINLUX® New K6 3000mW ⇒ ATOMSTACK A5 30W ⇒ ATOMSTACK A5 PRO 40W and tried it. The instruction manual is not available in Japanese, but it can be easily assembled while looking at the picture! Weight also PRO is designed to be quite lighter and easier to carry than other ATOMSTACK series Not only ceramics and leather goods, but also stainless steel and other metals can be easily sculpted if you paint the carving surface black in advance! There are also special metal engraving paints which are expensive and can be replaced by oily and water-based pens(^^)b [Precautions] It's better to try carving into thin metal by gradually increasing the setting (metal may distort!) ・When carving, lay a solid mat under it. (When carving cardboard or wood, it may pass through due to misconfiguration.) Soot is generated when carving wood, so it is good to install a fan or work with a small fan ・Working in the room causes soot to flutter, and everything in the room is covered with soot (^^; · The wood must be set according to the type of tree, or it will be finished Although focusing is not required, the focal length of the sculpture on a curved sphere is changed without using dedicated parts, so uneven burning occurs when finished.

    Comments (9)
    Show Original
  • 26/04/2021

    Built quality is excellent, easy to setup and get going. Laser beam is much thicker in horizontal lines than vertical lines, unlike the description. see picture. Cutting power is very weak. To cut 3mm mideum density balsa took 3 runs at 600 mm/m and 70% power. Tested dozens of times, not a clean cut. Engraving quality is excellent. Good for engraving, not so good for cutting. 4 star is a generous rating.

    Comments (7)
    Show Original
  • 10/05/2021

    Arrived in as little as a week, easy to set up and effortless, machine works very well and stable, would recommend

    Comments (4)
    Show Original
  • 07/04/2021

    Assembly was straight forward with the provided instructions. Put together and testing printing in less than an hour... maybe 30min. The atomstack3d site has much better documentation vs when it was announced for pre-order. There is a guide on how to operate it usng lasergrbl if you haven't found any Youtube videos describing setup and sofware use. In addition the shipping was fast! When first notified that the item was shipped in mid-March, a May date was given. That was disappointment especially given that shipping was supposed to be 15-30 days... to my surprise within 2 weeks of shipping notification it arrived!

    Show Original
  • 02/03/2021

    I ordered the product on February 19th, it reached me on March 1st. I got it in 10 days. I paid a small amount to their insurance and taxes on the site when buying. Free delivery by intermediate cargo without paying any customs duty. As for the product, the packaging is very good, the cargo is not damaged at all. It took about 1 hour as I did the installation slowly and carefully. They bagged each step separately for installation, no pieces ever blend together. The material is really good quality. I had a bit of trouble with the software after the installation, but I found it was the settings. Tried with Laser GRBL(WINDOWS) and Lightburn (MAC). Laser GRBL recognized it immediately and worked smoothly, but since I had trouble sizing on this program and recognized it as laser i A20 I've been experimenting with Lightburn. Lightburn recognized the device right away, but I spent an hour trying to keep the laser shut down. The problem is the laser speed is too high. I figured that out, and I was able to do incredibly detailed cuts. For now, I'd say you're doing very well on paper, on cardboard. I believe the one that came with the device, I did the cutting process with the 1mm plywoods, and I didn't have any problems. I'm going to have 3-4-6 mm mdf and plywood trials later, adding pictures.

    Comments (4)
    Show Original
  • 23/07/2021

    very nice product ! i buy it to cut rc planes and parts cut balsa so easy . i try to cut plywood 4mm 6 passes i dont try to engrave yet ! i use Lightburn for software!

    Comments (3)
    Show Original
  • 19/04/2022

    Good packaging, easy to install. Use the recommended software for the best result. Entrance level laser engraver. One of the best I really recommend it!

    Show Original

    Total 0 pages

    Go to page


    You might be interested in

    recommendation for you
    • US$499.00
    • US$499.00
    • US$349.99
    • US$1,099.00
    • US$529.00
    • US$1,199.00
    • US$299.00
    • US$329.99
    • US$1,299.99
    • US$99.99